Glass Feeding Machine/Medical Cutter

Glass Feeding Machine/Medical Cutter

Product Description

Company Info

Product Description

See the following: Useness
GB_93 air pushing ---- feeding machine is developped and researched refer to advanced structure of home and abroad, it gathered all the advantages of -----feeding machnine, it is wildly used in glass kiln such as horse hoof type or level fire.

It is perfect new product at present.

Main technique index
1. Volumn daily added: 0_240t/24h
2. Cooling water: 10_15l L/min
3. Cooling water pressure > 0.1Mpa
4. Degree of water hardness: Max2 DH-20mg GaO/L H2O
5. Swing angle: Left 10--right 10
6. Frequency of swing: 0_30/min cantinual and adjustable
7. Driving electrial motor: 1KW-380V 0~120Hz cantinual and adjustable
8. Vibrating electrical motor:
- 2 x 0.25KW-380v 0~120Hz cantinual and adjustable
- 2 x 0.4KW-380v 0~120Hz cantinual and adjustable
9. Out form dimension: Length x breath x height x 2500 x 1300 x 1860
10. Weight: About 1000KG
11. Gas source: 0.12_0.4Mpa
12. Diameter of connection pipe for cooling water: Dg25

Diameter of connection pipe for gas: DG15
Structure
This machine is maily made up of the following parts(see pictue 1), base; Swing rack; Swing plate; Driving structure; Swimming pole; Vibrating structure; Storehouse for receiving material.

Installation
1. This machine will be transported out of the factory wholely, it is adjustable and trial operated before leave the factory, and it meets concerned technique requirements.
2. This machine will be installed bracket made up of track or be put on the platform directly.
3. Electricity control cabinet is installed at the place where the temperature is lower.

Trial Operation and Repare
( ) Trial
When the machine is completely installed, and when all parts of driving and turning system are lubricated, we can make a trial according to the following steps.

1. To disconnect the line between the VLT frequency converter and electrical motor, swich on the power of VLT, according to the functuion of frequency converter, set necessary technique index ( can operate without electrical motor).
Please press the key of "stop" before connect to electrical motor, to make frequency converter stop outputting, then connect with electrical motor and make a trial to the whole system, and pay attention to the moving direction of electrical motor.

2. To adjust input frequency of driving electrical motor to suitable data.
3. To adjust the mileage of push harrow and the dgree of pressure to the below.
4. To adjust the saving valve of the basin to the necessary working pressrue, to aquire reasonable result.
5. To adjust the time, to make sure the times of swing between left and right.
6. To adjust according to input frequency of vibrating electrical motor and eccentricangle of two eccentricrodgear.
7. To make head arrow cooling water into recycling state.

When finish above steps, then we can make overload trial, during trial period. Please pay attention to adjust the pressure of gas source and input frequency of Electrical motor.
Address: Hanguo Gong Ye Yuan, Rizhao, Shandong, China
Business Type: Manufacturer/Factory
Business Range: Chemicals, Manufacturing & Processing Machinery
Company Introduction: Our company was registered in 2002, the main prodgaucts of our comapnay is glass feeding machine, fire proof brick, and built new kiln and pull down the old kiln, and design for the kiln, draw the picture for them.

Our company mainly produce Glass Feeding Machine and design and construct in Furnace (Kiln) Operation. We do all the job ourselves from Design to construction, Large Scale Coal-Burning Boiler, Construction drawing, gas regenerator.

We also sell refractory brick or fire brick, Compound silicate paint.

We have cooperated with a lot of company in China and Aroroad, Such as Russian.

300 MT/day Sodium Silicate project is our project in Russian, which was finished at the beginning of 2009.

Furnace operation specialists.
Once receive your question, the supplier will answer you as soon as possible.

Send your message to this supplier

Miss Liu Lei

Post a Sourcing Request Now

Last Login Date: Jul 23, 2009

Business Type: Manufacturer/Factory

Main Products: Glass Feeding Machine, Fire Proof Brick

Related Categories